Furniture Centre
Shop New / Luxury Automotive-Style Bed Alternative Guide
Shop New / Custom Italian Leather Sofas
Shop New / Custom Living Room FurnitureA dining table is decided by the room before it is decided by the wood: how many people sit at it, how much space is left behind the chairs, and whether the table has to extend for a second sitting. We build a custom dining table in Foshan to that plan rather than to a catalogue size, and the marble dining tables range shows the tops that come with it.
A custom made dining table is drawn once and quoted once: seat count, shape, base, top material and finish are recorded on a single sheet, and the dining chairs are ordered against that same drawing so the seat height and the table edge agree when the room is finally set.
What stays fixed is the method. A bespoke dining table starts from the seating plan, the drawing carries the tolerance it will be made to, and the top is not cut until the drawing is signed. That is the difference between a table that fits the room and one that fits a delivery slot.
What changes is shape and clearance. A luxury dining table in a narrow room becomes an oval or a rectangle with the legs pulled in from the corners, and a fixed chandelier decides the centre line before the base is chosen.
Production is 45-60 days from approved drawings, and the sample is approved before the batch is released. The sample settles the top and the finish rather than the seat count, which the drawing already fixes. Custom dining tables are quoted per project, with the exclusions written beside the quotation.
An extendable dining table answers a real problem and creates a new one: the leaf has to be stored somewhere, and the base still has to carry the extra length without putting a leg where a chair needs to go. A leaf that is not drawn as a joint is a gap waiting to open.
A made to order dining table is a drawing of your room: shape, top, base and finish chosen for the seats you actually use. See everything we make for the other rooms of a house.
Italian-inspired design direction only; products are made in China and no Italian origin is claimed. The Italian-style luxury furniture range is a proportion and finish reference, not a statement about where a piece is manufactured.
A restaurant dining table is specified by seat count and service route; a hotel dining table by repeat count and wear. An italian dining table in a private villa is usually the oval in the drawing room, where the walkway matters more than the seat count.
What we do not promise is that a stone top will read the same in another light, or that a leaf seam will disappear when the table is extended. The leaf is a joint, it is drawn as a joint, and it is inspected as one.
Seat count decides size, size decides shape, and the three are drawn together rather than one after another, because a table that is right in one and wrong in another is a table that gets moved. A table that is right for eight and wrong for six is a table that is wrong.
A round dining table for four reads smaller than a rectangular dining table for four, because the corners are where the space goes; an oval dining table seats six without the corners, and a square dining table for eight is usually two tables pushed together. A large dining table is a seating decision before it is a furniture decision, and the seat pitch decides the width before the top is chosen. Seat pitch is usually set at 60 cm per person, and the end seats need the legs pulled in from the corners.
The space behind a pulled-out chair is what the room actually needs, and it is measured with the chair out rather than pushed in. A dining table that fits the room but not the circulation is a table that ends up against the wall. A walkway that doubles as a service route wants the wider measurement, especially where the kitchen door opens into it.
Send the room plan, the seat count, the walkway behind the chairs, the door swing and the ceiling fitting. The marble dining sets with a bench and the marble-top dining sets show how a bench changes the count on one side without changing the footprint.
The base decides how many people can sit at the ends without a leg in the way, and it is the part of the drawing that gets argued about last and matters most in use.
A pedestal base keeps the corners clear and the leg line off the seating edge; a trestle base is the stable answer for a long top; a four-leg base is the one that reads as a traditional table. White marble dining sets usually take a pedestal, so the top reads as one slab rather than as a panel held up at four points.
An extension adds seats at the ends rather than at the sides, and the leaf is stored in the base or in a bag. The mechanism is specified on the drawing because a cheap leaf is the first part to fail, and a leaf that sags is visible across a room.
Assembled parts are made to plus or minus 2 mm for residential work and plus or minus 3 mm for contract work, quoted in the order rather than implied, and checked on the assembled table rather than on the bench. A table that rocks on a flat floor is a base problem, not a top problem. The drawing records the tolerance and the inspection sheet checks the same number on the assembled piece, so the two documents agree before the crate is closed.
The top is the surface the room is read from, and it is chosen for how it takes a glass, a plate and a spill rather than for how it photographs in a catalogue. A top that stains in the first month is a top that was chosen from a picture.
A wood dining table is warm under the hand and can be refinished; a solid wood dining table in oak or walnut is the usual answer for a family room, and an oak dining table takes a paler finish without losing the grain. A glass dining table keeps a small room open but shows everything underneath it. A walnut dining table reads darker at night, which is why it is often paired with a pale floor.
A marble dining table is chosen for colour and vein, a stone dining table for a harder surface, and a travertine dining table for a matte, chalky face. Each slab is selected rather than specified by name, and the joint between top and base is where the quality shows; a filled joint and a dry joint are the difference between a slab and a repair.
A stone top cannot be offered as a fixed range with fixed sizes, because the slab decides what is possible. The top is quoted per project and the range is the slab, not a catalogue, which is also why a second table a year later may need a new selection; that is a design decision rather than a fault.
The dining table is read against the living room through an open door, so the finish is chosen for the pair rather than for the table alone. Two tables in one house are compared by the eye long before they are compared by the invoice.
A modern dining table and a mid century dining table differ in base and edge rather than in finish family; an art deco dining table adds a stepped pedestal, a minimalist dining table removes the visible joint, and all three can share one top, which is what makes a second room possible a year later without a new colour conversation. A black dining table and a white dining table are the two ends of the same schedule, and a grey dining table sits between them. The casegoods and cabinets, beds and headboards, bedroom furniture sets, coffee tables, leather sofas, nightstands and side tables in the same house are drawn from that one schedule.
Batch variation is agreed in writing before production; a colour matching system can be described by a supplier, and what a buyer controls is the finish approval and written agreement on variation between batches, which is what a second phase is drawn against.
What cannot be promised is that two panels cut from different flitches will be indistinguishable, or that a sheen will read the same under a chandelier and under daylight. The room's own light is where the sample is judged, and that agreement is what a second phase is drawn against.
A sample is a physical decision, and on a table it is the top and the finish that carry it rather than the drawing. The sample is judged with the chairs in place, because the edge is seen against the seat. A table is judged by the hand on the edge and the eye down the top, and neither is settled by a photograph.
The sample settles the top material, the finish and the edge on a piece small enough to judge under the room's own light; where a stone top is specified, the sample also settles the vein direction, because a vein that runs the wrong way is visible from the door. The panel is judged in the room, at the height the table will sit, with the chairs in place.
Approval is a signature against the sample and the drawing. The luxury interior design language a studio works to is the reference the sample is judged against, and until the signature exists the batch is not released and the clock has not started. A change after the sample is a new sample rather than a note on the drawing.
No free sampling; the sample charge is deducted from the bulk order. No fixed sampling lead time is given. Photos and records are still to be taken.
A table is inspected twice, because a defect in white body is a fix and the same defect after finishing is a remake. The first round is about structure, the second about surface, and the two are not interchangeable; a surface defect found late is a remake.
The base is checked for square and level before the top is fitted, the top is checked against the drawing before finishing, and the assembled table is checked for rock on a flat floor rather than on a trestle.
The second round is against the approved sample: finish coverage, edge, and the joint between top and base. Inspection can take three forms: third-party inspection arranged on request, customer inspection, and video inspection. The sourcing guide for made-to-order furniture covers the questions worth asking of any supplier, and the inspection record travels with the crate so the unpack can be checked against it.
Four layers: a soft wrap against the finish, corner foam, a carton, and a timber crate for stone or glass, banded and marked fragile. The crate is loaded with the table on edge rather than flat, and the packing list travels with the container. A stone top is crated on edge so the slab carries its own weight rather than the joint.
The order runs from the seating plan to the container, and each stage produces a document the buyer can check before the next one starts.
A quotation goes back within 6-24 hours of a complete enquiry, because the numbers come from the drawing rather than from a list, and an enquiry without a seat count is answered with a question. A dining table manufacturer and a dining table factory are judged on the same document, and a wholesale dining table order is quoted per project rather than per container; the exclusions are listed beside the quotation so two offers can be compared.
A deposit holds a production slot, and the slot is counted from the approved drawing rather than from the enquiry. Production is 45-60 days from that approval, with inspection rounds inside the window. Where a project needs a China-side partner, working with a China-side partner sets out the split, and furniture sourcing and inspection covers the checks.
The delivery window is quoted with the shipping terms and counted from the container booking rather than from the day the order is signed, which is why the booking date is confirmed in writing. Where the goods are collected by the buyer's forwarder, the collection date is what the delivery window is counted from.
Most of our tables go into private dining rooms, and the project work is the same drawing discipline at a larger count with the same inspection sheet. A restaurant order is usually drawn per seating zone rather than per room, because a banquette and a freestanding table are specified differently even when the seats look the same.
A hotel or restaurant order adds a repeat count, a harder top and a base that survives a service route; the same drawings, samples, inspection rounds and packing process can also take on project orders. hospitality furniture programmes describes that work rather than claiming a client list, and the repeat is the same table with a count against the same sheet, and the inspection sheet carries the count so a short delivery is visible at the crate.
In a villa the table is drawn inside a whole-villa furniture supply package, so the dining room and the living room share one finish family and one top line across the door.
What changes is the repeat and the delivery sequence, not the drawing: a project order is quoted per project, packed room by room, and inspected against the same sheet as a single table, with the packing list naming the room each table belongs to.
The warranty is written on the order rather than implied, because a table is inspected after a year of use rather than at delivery. A table that is used daily shows its first marks in the base rather than the top, which is why the base finish is specified rather than left to the workshop.
The frame carries a one-year warranty, subject to the contract terms; the drawing and the finish schedule are the reference for any claim, and the claim is answered against the drawing number rather than against a description of the fault.
What is covered is set out in the contract rather than in a webpage: the frame, the joint and the base are named, and the cover is agreed at order so both sides know what a claim looks like before one is needed; the drawing number is what a claim is answered against.
No replacement period, no repair count and no wear allowance is stated as a number here, because those are contract terms rather than marketing lines, and a number on a webpage is not a term of sale; the contract is the document that carries them.
It is a table drawn from your room: seat count, shape, base, top and finish on one sheet, quoted per project, with the sample approved before the batch is released.
In a tight room, a bench on one side, a smaller oval top, or a table that extends only when needed; the circulation behind the chairs decides whether it works.
From a maker who draws it against your room rather than a size list; the top and finish are chosen from a sample, and the table is quoted per project.
The quotation starts from the seat count, the room plan and the top; it covers the table, the material, the hardware, the sample and the packing, with the exclusions listed beside it.
custom dining table made to order furniture options — Options are shape, base, top and finish; each is drawn on the same sheet, and the list is quoted per project rather than sold as a catalogue.
custom dining table build your own solid wood — Build your own starts with the seat count and the species: ash, beech, oak, birch, walnut or elm, with the boards and the finish recorded on the drawing.
custom dining table furniture company design options — A furniture company designs against the room: the drawing, the sample and the inspection sheet are the three documents the order runs on.
A table is a room decision before it is a furniture decision, and the drawing is what makes the two agree.
Villa projects usually arrive as a whole-house drawing set, not one room at a time. If you are choosing a villa furniture manufacturer for the full package, start with the room plan and the joinery drawings together; we quote the table and the fixed cabinets against the same set so the finishes agree.
marble dining table set with bench
white marble top round dining table
marble dining table with bench
marble top tulip dining table
tall marble top dining table
marble inlay dining table
black marble top dining table set
marble dining table and chairs
lippa marble dining table
marble top dining room table set
round marble dining table and chairs
brown marble dining table+8613433290964
No. 9, Longfeng Industrial Zone, Longjiang Town, Shunde District, Foshan City, Guangdong 528300, China