Custom Furniture Design & Manufacturing



A whole house is a different brief from a room: the pieces have to agree before any one can be signed off, and bespoke furniture design is the work of making them agree. We work as a bespoke furniture company, and one drawing set covers every room.
Where to buy bespoke italian furniture for villas in china comes down to one test: does one drawing set cover the house? A villa furniture manufacturer china brief is judged on that, and so is a luxury villa custom furniture manufacturer; the villa furniture manufacturer that passes is the one whose bespoke furniture design starts with a drawing.
Beds, wardrobes, casegoods, seating, tables and the pieces between them, on one schedule and one finish family.
What changes is the count: guest rooms repeat, a formal room does not, and a circulation decides what fits.
Production is 45-60 days from approved drawings; the sample is approved before the batch is released.
A whole-house brief starts with three documents, and the questions we ask are the ones that decide whether the set can be built as drawn rather than argued about later.
Send the architectural drawings, a room list and a material board. If you are working out how to order bespoke high-end furniture for private villas, the room list is the document that turns a design into an order: it names every piece, the room it belongs to, the finish it takes, and it is what the quotation is built from. A room list with no finishes is a shopping list, not a brief. A room list that names a left and right nightstand is a better brief than one that says a pair.
Where a design comes from a studio, we ask for written confirmation that the drawings may be used for production; that is a one-page document and it protects the studio as much as the order. Where the design is the client's own, the confirmation is a single line in the order sheet.
A brief without drawings becomes a measured survey and a set of photographic references, which takes longer and closes in more rounds; it is workable, but the first revision is usually the real brief, and the survey is what the drawing is built on.
The scope is a list of rooms rather than a list of pieces, because each room has its own constraint and its own repeat count, and a whole house is only as consistent as its least considered room.
The living room is read from the door, so the leather sofas, coffee tables and the side tables are drawn to one top line; the dining room follows with dining tables and dining chairs sized to the room rather than to a set. Where the two rooms are open to each other, the top line is set once and both rooms follow it.
Bedrooms carry beds and headboards, nightstands, bedroom furniture sets and casegoods and cabinets. A custom whole house furniture china order usually repeats one guest room drawing across several rooms, which is where whole-house customization saves the most time: one drawing, three rooms, one approval round.
The study takes Italian desks and shelving, the dressing room takes dressing tables and fitted joinery, and the hallway takes the console that has to clear the door swing. A furniture customization service china order often starts here because these are the rooms with the fewest catalogue answers, and a custom project solutions china brief is usually written around them.
A single piece is the same drawing at a smaller scale, and handmade sofas china or one dining table are quoted on their own measurements rather than as part of the house; the drawing discipline does not change, only the count. The hallway console is the piece that catches the door swing, and it is usually the last to be drawn. Where a client starts with one piece and adds rooms later, the schedule is written with that in mind from the first order. Where a project is comparing a Chinese custom furniture supplier, the same schedule is what makes the comparison possible, and wholesale furniture from China is quoted per project rather than per container.
Private clients usually start with a single room and end up asking for the rest of the house. That is how a villa and house furniture order normally begins here: one room as the sample, the remaining rooms priced on the same schedule. Beds, sofas, dining, casegoods and outdoor pieces stay on one colour and finish logic, so the dining chairs delivered in March still match the sofa that lands in September. You do not have to release everything at once — tell us which rooms are Phase 1, and the rest stay as optional lines in the same quotation, with the price and the finish locked.
On a whole house the sample is a board rather than a piece, and the board is what every room is judged against.
The panel settles the finish and the sheen on one surface, and the board puts the panel beside the stone, the cover and the floor so the combination is judged together rather than one at a time. A board that is approved room by room produces a house that is almost consistent, which reads worse than either extreme.
Upholstery is approved as a cover reference with a fill and a seam, and stone as a slab with a vein direction; on a whole house both are usually fixed once and repeated, which is what makes the rooms read as one order rather than as a series of purchases.
Approval is a signature against the board and the drawing, and sampling is not free. The sample charge is deducted from the bulk order. Until the signature exists the batch is not released and the clock has not started, and a later change is a new sample rather than a note.
What cannot be guaranteed is how a surface will age, or how a natural material will read in another light. Photographs of approved samples and the signed record are pending in the asset library.
One palette across the house is the difference between a furnished villa and a set of rooms, and it is decided on the board rather than in the room. It is also the cheapest decision to make early and the most expensive to correct late.
The palette names a finish family, a sheen and a colour for the joinery, and the same three values are carried into every room; where a room needs a contrast, it is a second finish named in the same schedule rather than an exception made later. The two most common failures are a sheen that changes between rooms and a white that is warmer in one room than the next, and both are visible from a doorway. A palette with five whites is four whites too many. Two finishes, named once, are enough for a house.
Batch variation is agreed in writing before production; a colour matching system can be described by a supplier, and what a buyer controls is the finish approval and the written record of variation between batches. The record is what makes a second phase possible a year later without a new colour conversation, and it is a page rather than a promise.
What cannot be promised is that two panels cut from different flitches will be indistinguishable, or that a paint will read the same on a wall and on a door; the room's own light is where the sample is judged, and the judgement is why the board exists.
A whole-house schedule names its materials once, and every room draws from that list rather than from a new conversation. The schedule is the document that stops a room being specified twice.
Visible solid timber is named by species: ash, beech, oak, birch, walnut and elm, each written on the schedule with the part it belongs to. Non-visible parts take Russian pine and domestic mixed wood, and boards are E1 grade; naming a species is a specification, not a stock promise, and the schedule is what the batch is judged against. The schedule also names the parts that are not visible, because those decide how the piece ages, and it is kept with the drawing.
Paint and lacquer are named by family and sheen, upholstery by cover, fill and seam, and stone by slab and vein direction, so a repeat order a year later can be drawn from the schedule rather than from a photograph. A material board without those four references is a mood board, and a mood board cannot be ordered. Each reference is dated on the board. Where a project changes a supplier mid-build, the named equivalent is what keeps the piece comparable.
Hinges, runners, handles and locks come from named partners or an approved equivalent named on the schedule, so a substitution is visible rather than silent, and a replacement part can be matched years later. A lock is specified with its keying, because a hotel key and a villa key are not the same order.
| Element | What is specified | What is written on the schedule |
|---|---|---|
| Visible solid timber | ash, beech, oak, birch, walnut, elm | species, part, grain direction |
| Non-visible parts | Russian pine, domestic mixed wood | board grade E1 |
| Paint and lacquer | finish family, sheen | sample reference, sheen |
| Upholstery and stone | cover, fill, slab | cover reference, vein direction |
| Hardware | named partner or approved equivalent | hinge, runner, handle |
A drawing is an intention and a tolerance is the promise, so the two are written on the same sheet. A tolerance written after the fact is an argument; a tolerance written before it is a specification.
The table covers assembled carcasses, doors and drawer fronts, and fitted runs to an alcove or wall: assembled parts at ±2 mm for residential work and ±3 mm for contract work, quoted rather than implied. Where a project mixes residential and contract rooms, the tighter figure is used throughout so one inspection sheet covers the order.
A fitted run is measured at three heights and both ends, and the narrowest number is the one the carcass is made to; circulation is measured with the doors open, because a drawer that opens into a walkway is a defect even when it is square. The same measurement decides whether a filler is drawn as a design line or as a repair, and a room that is 8 mm out of square is normal and is drawn for rather than argued about. It is checked with a feeler gauge on the hung door.
Send the plan, the wall elevations, the socket positions and the ceiling height; where the room is not built yet the drawing is issued provisionally and re-measured once the walls exist, and the tolerance is held against the second measure rather than the first.
| Part | Residential work | Contract work |
|---|---|---|
| Assembled carcass and plinth | ±2 mm | ±3 mm |
| Doors, drawers and fronts | ±2 mm | ±3 mm |
| Fitted run to alcove or wall | ±2 mm | ±3 mm |
The order runs from the board to the container, and each stage has an output the buyer can check before the next one starts. The three stages are quotation, drawing and production, and each one has a document attached.
A quotation goes back within 6-24 hours of a complete enquiry, because the numbers come from the drawings and the schedule rather than from a list. The quotation covers the pieces, the material and finish specified, the hardware, the sample and the packing; freight, duty and destination charges are quoted separately and the list of exclusions travels with every quotation.
Drawings are issued for revision, and each round is numbered so the approved set is unambiguous: a handle moved, a drawer deepened, a plinth removed; each round is numbered, dated and issued as a PDF. A complete brief usually closes in one round; a brief that arrives as photographs and approximate sizes usually takes three, and the difference is the room list rather than the furniture.
A deposit holds a production slot, and the slot is counted from the approved drawing rather than from the enquiry. Production is 45-60 days from that approval, with inspection rounds inside the window; the white-body check happens before any finish goes on.
The delivery window is quoted with the shipping terms, and it is counted from the day the container is booked rather than from the day the order is signed, which is why the booking date is confirmed in writing before the goods leave.
A whole-house order is inspected piece by piece, because one room cannot be released on another room's check. The check is recorded against the piece rather than remembered, which is what makes a later claim answerable, and the sheet is signed by the inspector.
Every carcass is inspected in white body: joints, square, level and the fixing points, recorded against the drawing number before any finish goes on. A frame corrected at this stage arrives square; a frame corrected after finishing has a repair in it, and the repair is what a client finds in year three. The records are kept with the drawing number so a later claim can be traced to the batch.
The finished piece is inspected against the drawing and the approved board: finish coverage, seam run, hardware fit and the colour read against the panel. Photographs before packing become the record for that piece, taken from the front, both sides and from above, and the record travels with the container. A piece without those photographs is not released, and the photographs are dated.
Rejected: cracks, exposed pins, sanding distortion, visible repair marks, spray marks, chipped edges, runs and lifted veneer. Doors are hung and swung, runners are cycled, and a piece that fails is reworked rather than shipped with a note. Inspection can take three forms: third-party inspection arranged on request, customer inspection, and video inspection.
A whole-house container is packed room by room, so the pieces for the first room come out first and the unloading sequence matches the order the rooms are finished in. The packing is planned with the room sequence rather than with the piece size.
Four layers: a soft inner wrap, corner foam, a carton, and a timber frame or crate for anything tall or glazed. Upholstered pieces are bagged before the foam so the cover is not pressed by tape, and the crate is marked with the piece list so a partial unpack can be checked against it. Crates are banded and marked fragile where the piece is glazed. The table below sets out what each type gets, and the layer that fails is the layer named in the claim.
| Product type | Layer 1 | Layer 2 | Layer 3 | Layer 4 |
|---|---|---|---|---|
| Cabinets and casegoods | soft wrap | corner foam | carton | timber frame |
| Upholstered seating | bagged | edge foam | carton | strapped carton |
| Stone and glass | soft wrap | crate insert | carton | timber crate |
Terms are quoted as FOB Foshan, CIF to the destination port, or door-to-door where the buyer wants one invoice. Where a client asks about professional installation for luxury villa furniture china, the answer is that fitting is arranged locally and is not part of this order; door-to-door is quoted where the client wants one invoice and no separate freight agent.
The forwarder books the space, the exporter documents the shipment and the receiving agent clears the goods; damage claims are made against photographs taken at unpacking, which is why the inspection record and the packing list travel with the container. The three documents are the record, the list and the photographs.
Most of our work is for private villas and apartments, and the project work is the same drawing discipline at a larger count, with the same drawings, the same samples and the same inspection rounds. A project order is judged on the repeat rather than on the single piece.
A villa package draws every room on one schedule and one finish family, and the Italian-style luxury furniture range is the reference language the rooms are drawn against when a client wants that proportion rather than a named collection. The reference is a proportion, not a brand.
A show flat is built to be photographed, so the pieces are specified for the camera, and a real estate project furniture supplier is judged on how the rooms read in a brochure rather than on the inside of a drawer. A sales gallery takes the same schedule in a lighter finish, because it sits under lamps for a season; it is usually the fastest room to approve because nothing in it is lived in.
A hotel order adds a repeat count and a higher-wear finish, and the same drawings, samples, inspection rounds and packing process can also take on project orders. hospitality furniture programmes describes that work rather than claiming a client list.
A villa brief often needs pieces we do not make, and the honest answer is to name what we make and what we coordinate. The list is short, and it is written down.
Beds, casegoods, cabinets, tables, seating and the fitted joinery, all drawn and inspected to the same schedule, so a piece in a guest room is checked the same way as the piece in the master suite.
A furniture trading company sourcing for luxury villa projects requiring bespoke solid wood beds and whole-house color matching systems is not what we are; where a project needs a piece outside our workshops, it is coordinated with a named partner and quoted separately, so the client can see which line belongs to which supplier. A partner's piece is inspected to the same sheet, and a partner is named on the quotation.
We do not act as an agent for other factories, and we do not carry a margin on a partner's piece. The luxury interior design language a studio sets is the reference, and the sourcing guide for made-to-order furniture covers the questions worth asking of any partner. Where a project needs a China-side partner, working with a China-side partner sets out the split, and furniture sourcing and inspection covers the checks.
The warranty is written on the order rather than implied, because a villa order is usually inspected a year after it is delivered.
The frame carries a one-year warranty, subject to the contract terms; the finish schedule and the drawn specification are the reference for any claim, and the claim is answered against the drawing number rather than against a description of the fault, in writing.
A claim is answered against the drawing number, the inspection photographs and the packing list, which is why those three travel with the order and are kept after delivery. Where a piece is damaged in transit and the damage was not recorded at unpacking, the photographs are the only evidence that exists, so the unpack is worth doing slowly.
What is not covered is wear from use, damage in transit that was not recorded at unpacking, and any change made to the piece after delivery. A change made after delivery is not a defect. The distinction matters most on stone and on leather, where a mark from use and a mark from a fault look identical in a photograph and are different in the schedule.
Architectural drawings, a room list naming every piece and its room, and a material board; where the drawings do not exist yet, a measured survey replaces them. A room list is the single document that saves the most rounds.
One finish family, one sheen and one colour are named on the schedule, and every piece is approved against a single panel rather than room by room.
Living and dining, bedrooms and guest rooms, study, dressing room and hallway, drawn as one schedule with one finish family and one repeat count.
A finish panel is signed against the board and the drawing, with the sampling charged and the sample charge deducted from the bulk order.
Assembled parts at plus or minus 2 mm for residential work and plus or minus 3 mm for contract work, quoted in the order rather than implied. The tolerance sheet is the reference for both.
Per project, from the drawings, the room list and the schedule; the quotation covers the pieces, the material, the hardware, the sample and the packing, with the exclusions listed beside it.
45-60 days from the approved drawing, counted from signature, with inspection and the shipment booking inside that window.
Four layers by product type, packed room by room, with FOB Foshan or CIF terms and a packing list that travels with the container.
For the wider picture, categories, buying stages and buyer types are set out in everything we make.
See the whole catalogue in Everything We Make.
Guide: Designing the Solution: From Layout to Materials
+8613433290964
No. 9, Longfeng Industrial Zone, Longjiang Town, Shunde District, Foshan City, Guangdong 528300, China