+8613433290964

[email protected]

Custom Nightstands, Sized to Your Bed

Custom Nightstands, Sized to Your Bed

A nightstand fits a gap nobody measured: between bed and wall, under a switch, beside a lamp. We build a custom nightstand to that gap and to its height; our notes on nightstand heights say what the eye expects.

We build a luxury nightstand and a plain bedside table on one drawing discipline: width, depth, drawer layout and finish set per room. The same drawing carries side tables for the same room, so both sides are ordered together.

Height against the mattress

A unit below the mattress line reads as a stool; one above the shoulder reads as a cabinet. Send the mattress top and frame rail and the carcass sits between them: custom nightstands from two numbers, not a stock size.

Fronts, hardware and storage

Fronts carry the drawer count and the handle line; storage runs to two drawers, three, or an open niche.

Lead time and sample approval

Production is 45-60 days from approved drawings.

Height, Width and Clearance at the Bedside

The bedside is the tightest part of a bedroom, and the numbers that decide it are all local: mattress top height, the distance from frame to wall, the swing of a wardrobe door, and the width left for a walkway.

Match the mattress top

A nightstand top usually lands level with the mattress top, or a little above it, so a lamp reads at the same height as the pillow. Where the mattress is deep the top is set from the mattress rather than the frame, and the gap under the top is closed by a plinth or left open for a basket.

Wall, wardrobe and walkway clearance

Clearance is measured with the door open, not closed. A wardrobe that swings towards the bed needs the swing plus a hand's width; a walkway wants the width of a person carrying a tray. In a narrow nightstand, depth is usually traded before width, because the front is what a hand reaches for in the dark.

Tolerance on a drawn piece

A drawn piece is made to a tolerance rather than to a nominal size, and the tolerance is written into the order: assembled parts at ±2 mm for residential work and ±3 mm for contract work. The table below is the one we work to, quoted rather than implied.

PartResidential workContract work
Assembled carcass and base±2 mm±3 mm
Drawer and door fronts, assembled±2 mm±3 mm
Stone top joint to carcass±2 mm±3 mm

What to send for the drawing

Send the room plan, the mattress size and top height, the wall the bed sits on, the wardrobe swing, and a photograph of anything the new piece sits against. From that a tall nightstand, a wide nightstand, a small nightstand for a guest room and a pair for a master bedroom are the same drawing with different numbers. If the room is not built yet, the drawing is issued as a provisional set and revised once the wall is measured.

Solid Wood, Stone Tops and Leather Fronts

A nightstand is small enough that material is read at arm's length, so species, board and top are specified one by one rather than as a finish name.

Solid wood bodies and board grade

Visible solid timber is named by species: ash, beech, oak, birch, walnut and elm, each written on the drawing with the part it belongs to. A walnut nightstand body is common in villa work because the grain reads at small scale, and a solid wood nightstand in ash or oak takes a paler finish without losing the grain. Non-visible parts take Russian pine and domestic mixed wood, and boards are E1 grade. Naming a species is a specification, not a stock promise.

An italian nightstand here means the proportions and the finish language rather than a copy of a named model: a lighter leg, a thinner top, a front without a visible handle. A live edge nightstand is drawn only where the slab has a straight inner face to sit against the carcass; a wood nightstand in a plain veneer is the safer choice for a pair that has to match.

Stone and marble tops

A marble nightstand top is a stone slab on a timber carcass, and the two move differently, so the fixing is a set of slots rather than screws through stone. Stone is chosen for colour and vein, and the joint between top and body is where the quality shows.

Leather-wrapped fronts

A leather nightstand front is a wrapped panel over a stable core, with the seam placed where the hand does not land. Leather is also why a front is specified separately: grain direction and seam line are drawing decisions.

Hinges, slides and hardware

Hinges, slides and feet come from named partners or an approved equivalent named on the drawing. A metal nightstand base is a welded or bolted frame finished separately from the carcass, so it can be re-finished later without touching the body. The Italian-style luxury furniture range is drawn from the same species and hardware schedule.

ElementWhat is specifiedWhat is written on the drawing
Visible solid timberash, beech, oak, birch, walnut, elmspecies, part, grain direction
Non-visible partsRussian pine, domestic mixed woodboard grade E1
Stone topmarble or stone slab on a timber carcassslab, vein direction, joint position
Leather frontwrapped panel over a stable coregrain direction, seam placement
Hardware and basenamed partner or approved equivalenthinge, slide, foot, finish

Drawers, Open Shelves and Wall-Hung Builds

Storage is the part of the brief that changes the build, and the four common shapes are a two-drawer box, a three-drawer column, an open niche and a wall-hung unit, each with its own fixing and its own cost in depth.

Two-drawer and three-drawer

Two drawers hold a book, a charger and a pair of glasses; the third drawer is where the piece stops being symmetrical, and a three-drawer column usually means a taller unit beside a lower bed. Drawer boxes are dovetailed or dowelled to the drawing and runners are specified rather than assumed; building a drawer unit sets out the sequence we follow.

Open shelves and niches

An open niche is a shelf with a back and a light, and it is the detail that dates fastest when the back is not specified together with the top; a shelf that is lit from behind needs the wiring drawn before the carcass is glued.

Wall-hung and floating builds

A floating nightstand hangs from a hidden rail fixed to the wall, so the wall is measured before the carcass is cut and the loading is checked at the fixing points. beds with floating nightstands are drawn as a pair so the two units sit on one level line.

Narrow, wide and tall units

A narrow unit for a small room, a wide unit used as a low dresser and a tall column are the same carcass with different proportions. A small bedside tables pair is often drawn to a shorter depth so the bed can still be made from the side. Where the bedside is too shallow for drawers, dressing tables and Italian desks take the work off the nightstand.

Matching the Bed and the Casegoods

A nightstand is judged as part of a set, and the set is judged from the doorway: the front line of the bed, the top of the casegoods and the top of the nightstand read as one line at a distance.

Match the bed and the casegoods

That line is why beds and headboards and casegoods and cabinets are drawn on one sheet. Where the room is being finished as a whole, bedroom furniture sets are specified together, because a nightstand ordered later is matched to a finish rather than made in it.

One finish logic across the suite

One colour and finish logic runs through the suite. A modern nightstand and a mid century nightstand differ in leg and edge rather than in finish family; an art deco nightstand adds a stepped front, a minimalist nightstand removes the handle line, and all three can share one timber and one sheen. A white nightstand in a matte finish and a black nightstand in a satin finish are two ends of the same schedule. The luxury interior design language a studio works to is the reference we draw against.

Batch variation agreed in writing

Batch variation is agreed in writing before production. A colour matching system can be described by a supplier, and what a buyer controls is the finish approval and the written record of variation between batches.

When the room is ordered later

When a second nightstand is ordered a year later, the drawing number and the finish panel are what make it possible to repeat the piece rather than approximate it, and that is the case whether the first unit was a single custom piece or part of a full suite.

Living With Solid Wood and Stone

Solid wood and stone behave differently in a heated room, and most of what goes wrong at a bedside goes wrong in the first month rather than in the fifth year.

Dust, humidity and solid wood

Dust a solid wood top with a dry cloth; water rings come from standing liquid, not from dust. In a heated room the relative humidity swings and a solid top moves across the width of the grain, which is why the top is fixed on slots rather than glued all round.

Cleaning stone and leather

Stone is wiped with a damp cloth and dried, and acidic spill is wiped immediately rather than left. Leather is dusted and kept away from a radiator; a leather front is treated as a textile in a hard place, not as a worktop.

What to check in the first month

In the first month, check that drawers still run level, that the top has not moved against its fixing, and that a seam has not lifted. These are general practices rather than a care programme; the finish schedule supplied with the order is the reference.

How a Custom Nightstand Is Made

The order process is the part a buyer can plan around, so it is worth setting out plainly rather than leaving it to the first email.

Quote in 6-24 hours

A quotation goes back within 6-24 hours of a complete enquiry, because the numbers come from the drawing rather than from a list. A made to order nightstand needs the size, the drawer layout, the material and the finish; a bespoke nightstand needs those plus the detail it is copying or departing from.

Drawings and revision

Drawings are issued for revision, and the revision rounds are where the piece is actually decided: a handle moved 20 mm, a drawer deepened, a plinth removed. Each round is numbered so the approved set is unambiguous, and sourcing guide for made-to-order furniture covers the questions worth asking before the drawing stage.

Deposit and production slot

A deposit holds a production slot, and the slot is counted from the approved drawing rather than from the enquiry. Production is 45-60 days from that approval; inspection and the shipment booking sit inside the same window.

What a buyer supplies on day one decides how many rounds follow. A complete set, meaning plan, elevations, mattress size, finish reference and drawings of anything already in the room, usually closes in one round; a set of photographs and a rough width takes three.

Where the room is not built yet the drawing is issued provisionally and re-measured once the walls exist, and the production slot is fixed only after that second measure.

Sample and Approval Before Production

A sample is a physical decision, and it is the cheapest place in the project to be wrong.

What the sample settles

The sample settles material, finish, edge and colour on a piece small enough to judge under the room's own light. Where a stone top is part of the order, the sample also settles the vein direction.

What you sign off before production

Approval is a signature against the sample and the drawing. Sampling is not free. The sample charge is deducted from the bulk order. Until the signature exists the batch is not released and the production clock has not started. Where a project needs a China-side partner to hold the sample and the approvals, working with a China-side partner sets out the split.

What cannot be guaranteed

What cannot be guaranteed is how a surface will age, or how a natural material will read in a different light. Where a client wants to change a finish after seeing the sample in the room, that change is a new sample rather than a note on the drawing, and it moves the approval date rather than the delivery date.

Photographs of approved samples and the signed record are pending in the asset library.

Quality Control Before Packing

Inspection happens twice, because a defect found in white body is a fix and the same defect found after finishing is a rebuild; the earlier it is caught, the cheaper it is for everyone.

White-body inspection

Every carcass is inspected in white body: joints, alignment, level and the frame's connection to the base. A nightstand manufacturer that inspects only at the end is inspecting the wrong moment. Corners that will not sit square are corrected here rather than shimmed after arrival, and the correction is recorded against the drawing number.

Finished inspection

The finished piece is inspected again against the drawing and the approved sample: front alignment, seam run, finish coverage and hardware fit. Photographs before packing become the record for that unit, taken from the front, both sides and from above, and the crate is not closed until those photographs exist.

Defect classes rejected

Rejected: cracks, exposed pins, sanding distortion, visible repair marks, spray marks, chipped edges, runs and lifted veneer. Stone tops are checked for a joint filled to hide a chip, and runners are cycled before the crate is closed. Each rejected class is a rework rather than a note.

Inspection can take three forms: third-party inspection arranged on request, customer inspection, and video inspection. furniture sourcing and inspection sets out the questions worth asking of any supplier.

Packing, Export Terms and Arrival

A nightstand is small, heavy for its size and easy to chip, so packing is where a cheap win or an expensive loss is decided. A chipped front is noticed by the client who unpacks it, not by the forwarder who moved it.

Four-layer packing by product type

Four layers: a soft inner wrap against the finish, foam at the corners, a carton around the piece, and a timber frame for anything with a stone top or glass. A leather front is bagged before the foam so the grain is not pressed by tape. The table below sets out what each product type gets.

Product typeLayer 1Layer 2Layer 3Layer 4
Solid wood nightstandsoft wrapcorner foamcartonstrapped carton
Stone or marble topsoft wrapcorner foamcartontimber frame
Leather frontbagged frontcorner foamcartonstrapped carton
Metal basesoft wrapedge foamcartonstrapped carton

FOB, CIF and door-to-door

Terms are quoted as FOB Foshan, CIF to the destination port, or door-to-door where the buyer wants one invoice. FOB leaves the container at the port of loading; CIF carries freight and insurance to the named port; door-to-door adds the destination charges, and the buyer still clears the goods unless the terms say otherwise.

Who handles what in transit

The forwarder books the space, the exporter documents the shipment, and the receiving agent handles clearance. Damage claims are made against photographs taken at unpacking, which is why the inspection record and the packing list travel with the goods. The packing list names each piece and each layer, so a claim can be matched to the layer that failed.

Where a project ships as one container, nightstands are packed with the rest of the suite so one document set covers the delivery and the pieces arrive at the same time.

Residences, Show Flats and Project Work

Most of our nightstands go into private residences, and the project work is the same drawing discipline at a larger count, with the same drawings, the same samples and the same inspection rounds.

Villa and apartment residences

In a villa the pair beside the bed is often drawn inside a whole-villa furniture supply package, so the coffee tables, dining tables and leather sofas in the same rooms share a finish family. In an apartment the same work happens at a smaller scale, with one pair doing the whole of the bedside.

Show flats and sales galleries

A show flat is built to be photographed and walked through, so the nightstand is specified for the camera: the top line, the handle and the sheen of the finish matter more than the inside of a drawer. A sales gallery takes the same piece in a lighter finish, because it will sit under lamps for a season.

Hospitality as capability proof

A hotel nightstand adds a locked drawer, a higher-wear finish and a repeat count, and the same drawings, samples, inspection rounds and packing process can also take on project orders. hospitality furniture programmes describes that work rather than claiming a client list.

Frequently Asked Questions

What height should a nightstand be beside a bed?

Level with the mattress top, or a little above it. Send the mattress top and the frame rail and the carcass is set between those two numbers.

How wide and deep should it be in a tight bedside space?

Wide enough for the lamp and the book, deep enough for the drawer runner. In a tight space the depth is traded first, then the drawer count.

Can it match the bed and casegoods I already have?

Yes, from a photograph, a finish panel or a sample. The drawing number and the finish panel are what make a repeat order possible a year later, and a photograph of the finish in daylight is enough to start.

Which wood species and hardware can I choose?

Ash, beech, oak, birch, walnut and elm, with a stone or leather top where the drawing calls for one. Hinges, slides and feet come from named partners or an approved equivalent.

How is the finish approved before production?

On a physical sample, judged in the room's light and signed against the drawing. Sampling is not free and the sample charge is deducted from the bulk order.

How long is production after drawings are approved?

45-60 days from the approved drawing, counted from signature. Inspection and the shipment booking sit inside that window.

How is it packed for export?

Four layers, ending in a timber frame where there is stone or glass, with FOB Foshan or CIF terms, and the packing list travels with the shipment.

What warranty comes with it?

One year on the frame, subject to the contract terms; the finish schedule and the drawn specification are the reference.

For the wider picture, categories, buying stages and buyer types are set out in everything we make.

Related reading: top Italian furniture brands · designer furniture gallery

tags: custom nightstand, bedside table, stone or solid wood

Contact Us

Please contact YUESHAN via the following way, you will get answer within 24 hours!

+8613433290964

[email protected]

No. 9, Longfeng Industrial Zone, Longjiang Town, Shunde District, Foshan City, Guangdong 528300, China