Furniture Centre
Shop New / Luxury Automotive-Style Bed Alternative Guide
Shop New / Custom Italian Leather Sofas
Shop New / Custom Living Room FurnitureYueshan builds custom coffee tables to drawing for private homes, interior design projects and soft furnishing schemes, as part of the wider bespoke villa furniture range. Stone, solid timber, glass and metal are specified per project, made in our Foshan workshops and shipped FOB or CIF. Private villa and apartment owners usually arrive with a floor plan and a seating group already chosen, and the same drawings, samples, inspection rounds and packing process also take on hotel and sales-centre project orders.
In short: built to your drawing — the drawing fixes length, diameter, height, edge profile and base geometry, and the material is agreed on a physical sample · cost — no figure is published in advance, because the top slab, base, finish, quantity and packing set it, and a quotation naming each comes back within six to twenty-four hours · 45-60 days from approved shop drawings · FOB Foshan or CIF, export declaration handled by us.
Most of what goes wrong happens before anyone cuts material: a length that does not fit the room, a stone that reads wrong in the real light, a base that blocks the walkway. Interior designers and soft furnishing studios settle all three on the drawing, which is the cheaper place to settle them.
A custom coffee table is one whose length, height, top material, edge profile, base geometry and finish are fixed by a project document rather than a stock range. The consequence is practical: it can be quoted, checked and inspected against something. Call it a bespoke coffee table or custom; either way the drawing sets the piece.
Five variables decide the piece. Size fixes proportion against the seating group. Top material fixes weight, care and how light lands on it. Edge profile fixes how it reads from standing height. Base geometry fixes legroom and stability. Finish fixes everything visible in a photograph and almost nothing in a spec sheet. A stock table locks all five; a drawing lets you move one.
A stone top is a plate; it is stable or unstable depending on what carries it. A plinth reads heavy, tapered legs let the floor run underneath, a double frame gives a long table its middle support. In practice, the brief that produces a good base is a floor plan, the seating height and depth, reference images and the destination port. The workshops behind this work are on the page about the factory.
Style here means a family of detailing decisions, not a catalogue range. Each direction is built to the same drawings and inspection standard.
A single slab or book-matched pair with the natural edge kept on the long sides. The work sits underneath: the slab is stabilised, the edges sanded without erasing the character, and the base set back so the live edge stays the silhouette.
Narrow strips laminated with the end grain showing, or long strips laid face up for a calmer linear figure. The most forgiving top for a family room: damage is local and repairable, and it takes a hand-rubbed oil rather than a film finish.
Square or rounded rectangle, one moulded edge profile, top and base in one material family. It is the safest shape for a private living room, because it is proportionate in almost any room. Our matching side tables carry the detailing into the corners.
Tapered legs, a visible square edge, a low height and a warm timber figure. Easy to specify badly: leg taper, set-back and edge thickness must resolve together or the piece reads as a generic reproduction. We can match the dining tables in the same material next door.
Stepped bases, inlay bands, high-gloss surfaces and metal used as a line rather than a finish. It risks over-decorating a small room, so it suits a generous floor plate. An inlay not set out on the drawing will not read as a line on site.
A thin top, an almost invisible edge, one plane of material carried as far as possible without a joint. The hardest direction to build, because nothing distracts from the joint. It pairs with console tables in the same top material.
Materials are chosen per project and confirmed by physical sample, and what reaches the drawing is what makes the sample, the quotation and the inspection describe the same piece.
Visible solid timber is specified in ash (Russian, American or Canadian), beech (English, Danish or French), oak (North American or European), birch (northeast China or Russian), walnut (northwest China or North American) and Manchurian ash (Fujian or Jiangsu). Hidden parts are usually pine. Two boards of one species from different origins read differently under the same finish, which is why the origin is written on the drawing of every solid timber coffee table we build. Timber goes quiet on a spec sheet: a custom wood coffee table is quoted by species and origin.
On our premium residential specification, substrates are E1-grade plywood and E1-grade MDF. Finishes include water-based lacquer, catalysed lacquer and hard-wax oil for a repairable low-sheen surface. Hinges, runners and flap fittings come from named partners including OSLASA, LAMP and SALICE, or an approved equivalent specified on the drawing, so a substitution is visible rather than silent.
| Component | What we specify | Must be fixed on the drawing |
|---|---|---|
| Top — stone | Natural stone selected per project, cut and finished in our stone workshop | Slab reference, thickness, edge profile, joint positions |
| Top — timber | Solid timber or veneer over E1 board | Species and origin, grain direction, finish system |
| Top — glass | Toughened glass with a polished chamfer | Thickness, tint, chamfer, fixing detail |
| Base — metal | Stainless steel, brass, painted steel or aluminium, fully welded | Section, joint type, colour, floor protection |
| Base — timber or stone | Solid frame, plinth or stone column | Section, set-back, levelling method |
| Finish | Water-based lacquer, catalysed lacquer, hard-wax oil or stone sealer | Sheen level, colour reference, sample record |
We publish no fixed stone list, because a list is a promise the slab trade cannot keep: quarries close, blocks run out, colour shifts between batches. A custom marble coffee table is booked slab by slab, veining shown before cutting.
A stone is chosen against four constraints: what the client wants to see, what the yard holds in the thickness required, how the piece must be cut, and what the room's light does to the surface. A named slab, photographed and held, answers all four; a list of names answers none.
We start from the brief and a room photograph, move to two or three candidate slabs, then book one against the project. That is when we can say which faces are usable and where the joint falls. Cutting runs on a CNC saw in our stone workshop, which makes a repeatable edge profile and a consistent joint gap possible across several tables in one order.
Sealed stone handles daily use but etches with acid — lemon, wine, vinegar, some cleaners. That is a property of the material, not a defect, and pretending otherwise is how a project ends with a complaint six months after handover.
Size is set by the drawing, not by a range of stock lengths. What we control is the relationship between piece and room, and the accuracy to which agreed dimensions are built. Where the sofa is already chosen, the room-side figures are set out under coffee table dimensions for a given sofa and room.
Seat height is the fixed point: the top sits level with, or a little below, the seat cushion, so a hand reaches the surface without the shoulder dropping. Against low modular seating the same height reads high, which is why the sectional and the table are drawn together. Our upholstered seating is drawn for that reason.
Round tops soften circulation and suit lobbies. Rectangular gives the most usable surface against a long sofa. Oval and irregular silhouettes carry a contemporary interior. Nesting sets put two or three heights in one footprint, and modular tables in separate stone, glass, timber or metal elements survive a re-plan of the room. Where the room turns, a custom round coffee table is measured against seat count and walkway.
Inspection is measured against the drawing, and the tolerance depends on two variables: the specification tier, and whether a component requires assembly. The table below turns “does it fit” into a number a project manager can check with a tape. A table that rocks is a floor problem as often as a table problem, so adjustable feet are specified on the drawing wherever floor contact matters.
| Check | residential | contract |
|---|---|---|
| Overall dimension, component requiring assembly | ±2 | ±3 |
| Overall dimension, component not requiring assembly | ±1 | ±2 |
| Level and floor contact at the feet | ≤1.5 | ≤2 |
| Diagonal difference, opposing edge 1,000 mm or more | ≤1.5 | ≤2.0 |
| Diagonal difference, opposing edge under 1,000 mm | ≤1.0 | ≤1.0 |
| Drawer front gap, top, left and right | ≤2 | ≤3 |
| Drawer front gap, middle and bottom | ≤2 | ≤3 |
Carcass components only.
Every custom made coffee table follows these steps, each ending with a document, which is why the schedule holds: nothing moves into production against an unwritten decision.
Send the drawing, reference images, dimensions, quantity and destination port. We return a quotation naming the materials, finish, packing method and trade term, usually within six to twenty-four hours. A quotation naming none of those is a number, not an offer. The sequence, and what each side supplies at every step, is set out in how to get a custom furniture quotation.
Production drawings take about three working days from a complete brief, and a revision round about one working day. They record dimensions, component positions, materials, surface treatments, structural details and special fittings. Work from your own drawings is welcome — DWG, PDF, SketchUp and hand sketches all start the same conversation.
Sampling and mock-up scope is agreed in the quotation, so the arrangement is fixed before production starts rather than negotiated after it. The rounds are set out in our guide to sample and mock-up approval.
Only the approved drawing starts a made to order coffee table. Packing is planned against the structure, the stone or glass content and the shipment method. After-sales questions are answered within twenty-four hours.
Timing is asked second and complained about first, so it is worth being precise about what the date measures.
Production lead time is 45-60 days from approved shop drawings. Warranty terms run per contract and are described under warranty and after-sales.
There is no minimum order. Tables are quoted per project, and one table is quoted the same way as a larger order.
Sampling and mock-up scope is set at quotation stage, before anything is cut on the shop floor. The sample is approved ahead of the batch, and the production clock only starts once the approved drawings are signed. A first drawing takes about three working days, a revision round about one. None of that sits inside the lead time.
We ship on FOB Foshan or CIF terms to the destination port named in the quotation.
We quote FOB Foshan, and CIF to a named destination port where the buyer prefers us to arrange the ocean leg. On CIF the booking runs through the freight forwarders and logistics partners we work with for that shipment. Trade term, port and packing method are stated in the quotation.
Export declaration is handled by us. Import clearance at destination is normally the buyer's responsibility, the ordinary split under FOB and CIF. For small mixed loads we can run a consolidated door-to-door arrangement that puts export, ocean, import clearance and final delivery under one document; the paperwork is covered under shipping and customs. Site delivery and installation can be quoted on request, and furniture installation and site handover is quoted as separate scope.
Packing is specified against the material, not the value of the piece. Stone and glass are packed differently from timber, and an oversized top differently from a nesting set.
| Layer | What it is | Protects against | Applies to |
|---|---|---|---|
| 1 — Contact wrap | PE foam sheet or pearl cotton against the finished surface; on stone and glass, a thickened pearl-cotton edge wrap | Abrasion and surface marking | Every piece |
| 2 — Cushion and corners | Foam board throughout; L-profile corner protectors on wooden knockdown pieces, foam corner guards on upholstered pieces | Impact at corners and edges | Every piece |
| 3 — Carton or board | Carton or kraft wrap throughout, with a timber frame added to a long top; woven bag and rope on upholstered pieces | Dust, scuffing, load compression | Every piece |
| 4 — Timber crate | Timber crate or frame with fragile and heavy-lift markings | Crushing, stacking load, handling damage | Stone, glass, oversized and overweight pieces |
Inspection is a set of named checks against a named document. That is the only version that means anything: “we check everything” cannot be verified.
Each piece is inspected twice: in white wood before any finish, and again as a finished product. The white-wood pass catches structure, joinery, sanding and dimension — faults that cannot be fixed after finishing. The finished pass catches surface, colour, hardware and assembly, with photographs from six angles kept against the order. Third-party inspection can be arranged on request through third-party furniture inspection services; the programme is on our inspection records page.
Not accepted on a delivered piece: cracking or blistering; exposed substrate or fixings; distortion from sanding; visible repair marks; spray-gun marks or dry spray; chipped edges; sharp painted edges; runs, oil and glue marks; veneer lifting; surface waves; open joints. On contract-tier work the defect schedule in the contract governs.
Metalwork is fully welded, with no slag, porosity, weld spurs, undercut or spatter, and dressed so the joint reads as intended. Hardware colour is checked under a 40 W daylight lamp and must not be distinguishable within fifteen seconds — a plain test that catches what showroom lighting hides.
The projects below were delivered by the same factory and project team, in the years and locations stated. Client names are references only: nothing here implies an endorsement, and no project photography is reused without clearance.
Most of our tables are bought the way you are probably buying one: one room, a sofa already chosen, and a ceiling height or a lift that rules out half the shapes. Xianglu Bay terraced villa, Zhuhai (2021, 321 m²); Qiaocheng One, Shenzhen (2021, 380 m²); Shuangxi Garden, Shenzhen Nanshan (2019); Hushan Yaju, Dongguan Humen (2019); Sunac Jiurongtai, Jiangmen (2019); Huaxi courtyard villa show house, Guiyang (2018). Joinery for the same room is under casegoods and cabinets.
Yuequan Academy sales office, Jinhua (2022, 280 m²); Vanke Zhenshan Mansion, Shenzhen; Vanke Baisha Runyuan, Kunming (2021); Zhangtai City sales hall, Nanning (2018); Wubian Residence, Dongguan (2018). Showroom furniture is moved, sat on and photographed daily, so finish and base wear harder than in a private room.
Project orders. The same drawings, samples, inspection rounds and packing process can also take on project orders — past work includes Deep City Investment teppanyaki restaurant, Shenzhen (2022, 1,000 m²); Chongqing Fantasia sales centre, Yubei (2022, 800 m²); Longyun Tiancheng sales hall, Jiangsu (2020, 1,200 m²); and Oriental Garden villa clubhouse, Shenzhen OCT (2017).
We publish no figure: top slab, base, finish, quantity and packing move the cost more than anything else, and a quotation naming each comes back within six to twenty-four hours.
45-60 days from approved shop drawings.
Yes. DWG, PDF, SketchUp and hand sketches all work. The drawing fixes length, diameter, height, edge profile and base geometry, and the wood, veneer, glass or metal is agreed on a physical sample. A shop drawing comes back in about three working days.
Sampling and mock-up scope is agreed in the quotation, so the arrangement is fixed before production starts. Sampling is not free; the sample charge is deducted from the bulk order.
Yes. With a slab reference, a yard or a sample, we work to it. With only a direction, we select two or three candidates against the room and brief, and confirm by physical sample before cutting.
We quote FOB Foshan or CIF to a named port. Export declaration is ours, import clearance is the buyer's, and small mixed loads can go consolidated door-to-door under one document.
One year on the frame, subject to the contract terms. Stone, glass and finishes are covered per contract, and after-sales responds within twenty-four hours.
No. Tables are quoted per project; one table is quoted like a larger order.
The pieces below are the coffee tables and sub-collections currently in production or on the boards, grouped by the question buyers arrive with.
fake marble coffee table
round faux marble coffee table
restoration hardware marble coffee table
gold and marble coffee table
grey marble coffee table
box frame marble coffee table
white marble round nesting coffee table
black marble oval nesting coffee table
marble coffee table tray
marble coffee table and end tables
green marble coffee table
solid marble coffee tabletags: custom coffee tables, marble coffee table, stone coffee table, solid wood coffee table, coffee table manufacturer, bespoke coffee table
+8613433290964
No. 9, Longfeng Industrial Zone, Longjiang Town, Shunde District, Foshan City, Guangdong 528300, China